BDS 2013-2018 RAM 3500 4WD,REAR AIR RIDE,GAS,5.5" LIFT,SPRING,NITRO SHOCKS
BDS 2013-2018 RAM 3500 4WD,REAR AIR RIDE,GAS,5.5" LIFT,SPRING,NITRO SHOCKS
SKU:STU BDS1651H
Couldn't load pickup availability

Brand New BDS Suspension 5.5" Lift Kit with Nitro Shocks, Coil Springs, & Coil Spacers (Part #BDS1651H).
Improve the ride and style of your 2013-2018 RAM 3500 gas powered truck, equipped with rear air ride from the factory, with this 5.5-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.
Up front the lift kit includes gas-specific Pro-Ride coil springs, radius arms drop brackets, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned nitrogen charged shocks. In the rear this kit utilizes a high-strength fabricated lift block, heavy duty air bag spacers, longer u-bolts and a matching set of shocks.
Fits:
- Ram:
- 2013-2018 3500 4WD Gas with Rear Air Ride
Notes:
- 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well.
- The carrier bearing drop is necessary for models equipped with two-piece rear drive shaft.
- Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
- DRW models fit inner wheel clearance to the upper U-bolt plate on 5.5-6" kits
- Recommended Tires & Wheels (Trimming may be required): 37 x 12.5 with 17 x 9 and 4.5 in. Backspace, 37 x 12.5 with 17 x 9 and 5.625 in. Backspace, or 37 x 12.5 with 20 x 9 and 5.625 in. Backspace
Features:
- Heavy duty radius arm drop brackets maintain proper suspension geometry
- Front high strength progressive rate coil springs for a great ride on any terrain
- Front track bar relocation bracket to re-position axle
- Forged drop pitman arm to correct steering angles
- Front sway bar correction to maintain handling performance
- HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
NX2 Nitro Series:
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
Specs:
- Front Lift Method: Coil Spacer
- Front Lift Height: 5.5"
- Rear Lift Method: Coil Spacer
- Rear Lift Height: 6"