FUEL PUMP,300,LATE MODEL/MOD,W/BYPASS

Brand New Waterman Circle Track Fuel Pump with Check Valve and with Adjustable Flange, .300", 2.8 GPM (Part #LM300).

The WRC LM300 Fuel Pump is engineered to withstand the punishment of competitive circle track racing. This fuel pump is designed and machined from forged aluminum, and contains machined steel shafts and precision lapped gears. Each fuel pump is equipped with an adjustable or "SWIVEL" flange.  After mounting the fuel pump, the flange clamp bolt can be loosened to allow for easy rotation and alignment of your fuel pump.  Simply re-tighten the flange clamp bolt once the fuel pump has been properly positioned.  Over the past several years, great advancements have increased cylinder head efficiency by 25% to 35%.  Should not your fuel system deliver an additional 25% to 35% in fuel volume to compliment these increases?  Each pump is flow tested to ensure optimum performance and shipped "RACE READY".

Features

• .300" Gear Set
• Flows 2.8 gallons per minute
• -10 AN Inlet
• -8 AN Outlet
• Includes a -6 AN Check Valve that is Preset at 22 lbs with a .140 Jet
• Also includes a Phenolic heat spacer
• This pump should be used with a dead-head style pressure regulator; you can see the Waterman plumbing diagram below, which shows the main way to use this pump; it can also be used by removing the check valve, installing a Bypass Regulator (instead of a dead-head Regulator), then returning the fuel to the fuel cell with a line direclty from that Bypass Regulator 
• Provides 25-35% more volume than standard pumps
• Flow tested and ready to race
• Adjustable mounting flange included
• Weighs only approximately 2 lbs.
• These pumps are typically mounted to compatible Power Steering Pumps (KSE, KRC, Sweet, etc) or compatible Dry Sump Pumps (every brand of Dry Sump Pump requires a mounting bracket to mount this pump on it; there are many different brackets and we have many of them in stock; just ask if you need to get one of those as well)
• It is shown mounted to a KSE Power Steering Pump, which is then mounted on a Stock Car Products 4 Stage Dry Sump Pump.
• In our store, we actually have this Waterman Fuel Pump in complete Pump assemblies with a KSE Power Steering Pump and a Stock Car Products, Dry Sump Pump
• Commonly used with Rocket, Warrior, Masterbilt, Bloomquist, Barry Wright, Rayburn, GRT, Shaw, and almost all other Late Model Chassis, as well as many other Circle Track race cars

Shown to the right mounted to the back of a KSE Power Steering Pump, which is then mounted to the back of a Stock Car Products 4 Stage Dry Sump Pump;  This is one of the common applications for this Fuel Pump, and we have this complete setup available