Skip to product information
1 of 2

ZONE 2018-2023 JEEP WRANGLER JL 2-DOOR 3" SUSPENSION LIFT KIT WITH NITRO SHOCKS

ZONE 2018-2023 JEEP WRANGLER JL 2-DOOR 3" SUSPENSION LIFT KIT WITH NITRO SHOCKS

SKU:STU ZONJ33N

Regular price $500.75
Regular price Sale price $500.75
View full details

BRAND NEW ZONE OFFROAD 4" SUSPENSION LIFT KIT WITH NITRO SHOCKS (PART #ZONJ33N).

DESIGNED AS A COMPLETE SYSTEM, THIS 3" LIFT INCLUDES EVERYTHING NECESSARY TO PROPERLY LIFT YOUR NEW WRANGLER JL WHILE ALLOWING CLEARANCE FOR 35-37" TIRES. THE EXTRA RIDE HEIGHT COMES FROM A SET OF REPLACEMENT JL-SPECIFIC COIL SPRINGS AT EACH CORNER. THESE SPRINGS ARE ENGINEERED FOR ADDITIONAL RIDE HEIGHT, IMPROVED SUSPENSION ARTICULATION, AND TO PROVIDE AN CUSTOM-TAILORED "SPRING RATE" TO COMPENSATE FOR THE MASS OF AFTERMARKET WHEELS/TIRES AND EXTRA GEAR / OFF-ROADING EQUIPMENT. IN ADDITIONAL TO REPLACEMENT COIL SPRINGS AND SHOCKS, THIS KIT INCLUDES FRONT LOWER CONTROL ARM CAM WASHERS TO CORRECT CASTER ALIGNMENT. EXTENDED-LENGTH, HEAVY-DUTY FRONT AND REAR SWAY BAR LINKS ARE SUPPLIED TO CORRECT SWAY BAR GEOMETRY, WHILE BUMP STOP EXTENSIONS LIMIT SUSPENSION UP-TRAVEL. WRAPPING UP THIS KIT IS A HEAVY-DUTY REAR TRACK BAR BRACKET, USED TO RE-CENTER THE REAR AXLE AND ALL THE NECESSARY HARDWARE REQUIRED TO COMPLETE THE FULL INSTALL.

FITS:

  • JEEP:
    • 2018-2023 WRANGLER JL 2 DOOR 4WD

FEATURES:

  • F/R COIL SPRINGS TO SET RIDE HEIGHT, MAINTAIN RIDE AND IMPROVE ARTICULATION
  • NITRO-SERIES GAS SHOCKS FOR SMOOTH ON/OFF-ROAD PERFORMANCE
  • F/R EXTENDED SWAY BAR LINKS TO CORRECT SWAY BAR OPERATING ANGLE
  • F/R BUMP STOP EXTENSIONS TO PROPERLY LIMIT SUSPENSION UP TRAVEL
  • FRONT LCA CAM WASHERS TO CORRECT FRONT END CASTER
  • REAR TRACK BAR BRACKET TO RECENTER REAR AXLE
  • ALLOWS CLEARANCE FOR 35-37" TIRES

SPECS:

  • FRONT LIFT HEIGHT: 3"
  • REAR LIFT HEIGHT: 3"
  • MATERIAL: STEEL
  • FRONT LIFT METHOD: COIL SPRINGS
  • REAR LIFT METHOD: COIL SPRINGS
  • LIFT TYPE: LIFT KIT
  • WHEEL SIZE: 17 X 9
  • BACK SPACING: 4.5"
  • MAX TIRE SIZE: 35 X 12.5
  • FINISH: POWDERCOAT
  • CUTTING REQUIRED: NO
  • ACCOMMODATES FACTORY WHEELS: NO
  • WELDING REQUIRED: NO

NOTES:

  • STOCK WHEELS CANNOT BE REINSTALLED W/O INSTALLING WHEEL SPACERS DUE TO CLEARANCE ISSUE TO REAR SWAY BAR LINKS.

YOU CAN VIEW AND DOWNLOAD THE COMPLETE ASSEMBLY INSTRUCTION BOOKLET FOR THIS KIT HERE.