ZONE 2014 F-150 4WD 6" SUSPENSION LIFT KIT,5" REAR BLOCK,FOX SHOCKS
ZONE 2014 F-150 4WD 6" SUSPENSION LIFT KIT,5" REAR BLOCK,FOX SHOCKS
SKU:STU ZONF40F
Brand New Zone Offroad 6" Suspension Lift Kit with FOX 2.0 Adventure Shocks (Part #ZONF40F).
Take your F150 to new heights with this 6" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear a block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.
Notes:
- Lift Block Selection: This kit is offered with either 4" or 5" rear lift block kit and in either case it will replace the factory rear blocks. The 5" block will net a level to slightly tail high stance, the 4" block will net a level to slightly tail low stance. Choose rear lift height based on your ride height preference.
- Power steps? If your vehicle is equipped with factory power steps, it will require E-Brake Relocation Bracket.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
- Wheels / Tires: May require bumper or fender trimming depending on wheel and tire choice. See installation instructions for more information.
Fits:
- Ford:
- 2014 F-150 4WD with 5" Rear Blocks
Features:
- Heavy-duty differential skid slate improves off-road protection.
- High-strength, 1/4" steel construction crossmembers correct lower control arm geometry.
- High-strength, CNC machined, replacement steering knuckles improve strength while correcting steering angles.
- Lift system does not change the front track width of the vehicle.
Fox 2.0 Adventure Series Shocks Features:
- Body Plating: Thick silver powder coat
- Body: 2.0 Smooth bore and honed seamless alloy bodies.
- Bushings: Quiet nitrile rubber allows for increased suspension articulation
- Internal Reservoir: Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
- Mounting: Direct replacement for stock and aftermarket lifts kits
- Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures
- Shaft: 5/8" hard chrome plated heat-treated alloy steel
Specs:
- Front Lift Height: 6"
- Rear Lift Height: 5"
- Front Lift Method: Knuckle & Strut Spacer
- Rear Lift Method: Cast Blocks
- Lift Type: Lift Kit
- Wheel Size: 18 x 9
- Back Spacing: 5"
- Max Tire Size: 35 x 12.5
- Wheel Size 2: 20 x 9
- Back Spacing 2: 5.5"
- Max Tire Size 2: 37 x 12.5
- Wheel Size 3: 22 x 9
- Back Spacing 3: 5.5"
- Max Tire Size 3: 37 x 12.5
- Cutting Required: No
- Accommodates Factory Wheels: See Notes
- Welding Required: No
You can view and download the assembly/instruction booklet here and here.