ZONE 2023-2025 F250,F350 4WD DIESEL,7" RADIUS ARM LIFT KIT WITH FOX SHOCKS
ZONE 2023-2025 F250,F350 4WD DIESEL,7" RADIUS ARM LIFT KIT WITH FOX SHOCKS
SKU:STU ZONF127F
Couldn't load pickup availability

Brand New Zone Offroad 7" Radius Arm Lift Kit with FOX 2.0 Shocks (Part #ZONF127F).
Zone Offroad now offers 7" radius arm lift kits for the 2023-2025 Ford F250/F350 Super Duty 4WD diesel trucks. These new 7" lift kits are designed to be complete with everything needed to properly lift your new Super Duty to allow clearance for up to 37" tires.
Fits:
-
Ford:
- 2023-2025 F-250 Super Duty 4WD Diesel
- 2023-2025 F-350 Super Duty 4WD Diesel
- 2023-2025 F-250 Super Duty 4WD Diesel
Notes:
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
- Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
- Some trucks with a rear drive-line vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, Zone recommends having this performed prior to installing the lift.
- Does not fit vehicles with radius arm mounted ride height sensors.
- Fits SRW models only
- Recalibration of your vehicles Advanced Driver Assistance System (ADAS) cameras, radars, light detection and ranging (LiDAR), and other sensors may be necessary by your local dealership or ADAS service center. This will ensure proper functionality of the vehicle features such as lane keeping, lane departure, parking assistance, blind-spot detection, adaptive cruise control systems, and other functions as they did prior to installation.
- Factory wheels fit when paired with factory / original equipment tire size.
-
Recommended Tires & Wheels (Trimming may be required): 37 x 12.5 with 20 x 9 and 4.5 in. Backspace
Features:
- Heavy duty fabricated steel radius arms that correct caster alignment while maximizing ground clearance.
- Forged pitman arm to correct steering angles.
- Heavy duty fabricated track bar relocation bracket to re-center the front axle.
- Full length specific coil springs which are diesel specific.
FOX 2.0 Adventure Series:
- 2-inch diameter steel body
- Internal floating piston (IFP) monotube design
- Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting clear anodized finish
Specs:
-
Front Lift Method: Coil Spring & Radius Arm
-
Front Lift Height: 7"
-
Rear Lift Method: Block
- Rear Lift Height: 4.5"
You can view and download the assembly or instruction booklet here.