ZONE 2003-2007 DODGE RAM 2500,3500 4WD DIESEL,4" REAR AXLE,6" COIL SPRING LIFT
ZONE 2003-2007 DODGE RAM 2500,3500 4WD DIESEL,4" REAR AXLE,6" COIL SPRING LIFT
SKU:STU ZOND27F
Couldn't load pickup availability

Brand New Zone Offroad 6" Coil Spring Lift Kit with FOX 2.0 Adventure Series Shocks (Part #ZOND27F).
It’s time to hang with the big boys. You can’t help but stand out with this 6" Lift Kit that clears 37" tires. Get the look and performance you want out of your truck. Yet another kit from enthusiasts, for enthusiasts.
Fits:
-
Dodge:
- 2003-2007 Ram 2500 4WD Diesel with 4" Rear Axle
- 2003-2007 Ram 3500 4WD Diesel with 4" Rear Axle
Notes:
- If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit.
- Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
- Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
- Factory wheels fit when paired with factory / original equipment tire size.
- Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
- Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
- Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
- Recommended Tires & Wheels (Trimming may be required): 37 x 12.5 with 17 x 9 and 5 in. Backspace, 37 x 12.5 with 18 x 9 and 5 in. Backspace, or 37 x 12.5 with 20 x 9 and 5 in. Backspace
Features:
- 100% bolt-on design for easy installation.
- High-strength control arm relocation brackets correct suspension geometry and add rigidity.
FOX 2.0 Adventure Series:
- 2-inch diameter steel body
- Internal floating piston (IFP) monotube design
- Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting silver coated finish
Specs:
-
Front Lift Method: Coil Spring
-
Front Lift Height: 6
-
Rear Lift Method: Block
- Rear Lift Height: 4"
You can view and download the assembly or instruction booklet here.