NaN -Infinity

ZONE 2013-2018 RAM 3500 4WD DIESEL 4.5" RADIUS ARM LIFT KIT,2" BLOCK,FOX SHOCKS

ZONE 2013-2018 RAM 3500 4WD DIESEL 4.5" RADIUS ARM LIFT KIT,2" BLOCK,FOX SHOCKS

STU ZOND136F

$1,320.50
$1,320.50
View full details

Brand New Zone Offroad 4.5" Radius Arm Lift Kit with 2" Rear Block Kit and FOX 2.0 Adventure Shocks (Part #ZOND136F).

Take your RAM 3500 to new heights with this 4.5" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arms to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.

Fits:

  • Ram:
    • 2013-2018 3500 4WD Diesel

Notes:

  • Although very rare, front drive-line vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit.
  • Optional t-case indexing ring kit recommended to reduce front driveline angle.
  • Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
  • Does NOT work for models with factory rear airbag suspension.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
  • Recommended Tires and Wheels (Trimming may be required): 35 x 12.5 with 17 x 9 and 4.5 in. Backspace, 37 x 12.5 with 18 x 9 and 5.75 in. Backspace, and 37 x 12.5 with 20 x 9 and 5.75 in. Backspace 

Features:

  • Progressive rate front and rear coil springs improve ride quality and off-road performance while lifting and leveling the stance
  • Radius arm drop brackets to correct caster and improve suspension geometry
  • Forged pitman arm and track bar relocation bracket to correct steering angles and re-center front axle
  • Extended bump stops, sway bar relocation and brake line relocation to maintain factory-like operating angles
  • Bump stop extensions, track bar bracket and sway bar correction to correct suspension geometry

Fox 2.0 Adventure Series:

  • 2-inch diameter steel body
  • Internal floating piston (IFP) monotube design
  • Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting silver coated finish

Specs:

  • Front Lift Method: Coil Spring & Radius Arm
  • Front Lift Height: 4.5"
  • Rear Lift Method: Block Kit
  • Rear Lift Height: 2"

You can view and download the assembly/instruction booklet here.

Lift & Leveling Kits