Skip to product information
1 of 1

ZONE 2009-2013 DODGE RAM 2500,3500 4WD DIESEL,6" COIL SPRING LIFT,FOX SHOCKS

ZONE 2009-2013 DODGE RAM 2500,3500 4WD DIESEL,6" COIL SPRING LIFT,FOX SHOCKS

SKU:STU ZOND134F

Regular price $1,428.60
Regular price Sale price $1,428.60
View full details

Brand New Zone Offroad 6" Coil Spring Lift Kit with FOX 2.0 Adventure Shocks (Part #ZOND134F).

Ready for the big time? Then this is your 6" Lift Kit. You’ll really stand out from the crown when you clear massive 37" tires. Get the look and the performance you want.

Fits:

  • Dodge:
    • 2009-2010 Ram 2500 4WD Diesel with 3.5" Rear Axle
    • 2009-2010 Ram 3500 4WD Diesel with 3.5" Rear Axle
  • Ram:
    • 2011-2013 2500 4WD Diesel with 3.5" Rear Axle
    • 2011-2013 3500 4WD Diesel with 3.5" Rear Axle

Notes:

  • This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
  • Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
  • This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
  • Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
  • Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper's stock location.
  • Works on 2013 2500 with 4 link front suspension only.
  • Will not fit 1 Ton Trucks.
  • Recommended Tires & Wheels (Trimming may be required): 37 x 12.5 with 17 x 9 and 5 in. Backspace, 37 x 12.5 with 18 x 9 and 5 in. Backspace, or 37 x 12.5 with 20 x 9 and 5 in. Backspace

Features:

  • 100% bolt-on design for easy installation.
  • High-strength control arm relocation brackets correct suspension geometry and add rigidity.

FOX 2.0 Adventure Series:

  • 2-inch diameter steel body
  • Internal floating piston (IFP) monotube design
  • Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting silver coated finish

Specs:

  • Front Lift Method: Coil Spring
  • Front Lift Height: 6
  • Rear Lift Method: Block
  • Rear Lift Height: 4"

You can view and download the assembly/instruction booklet here.