BDS 2020-2026 GM 2500HD,3500HD 4WD,2" LEVELING KIT,FOX 2.5 PERFORMANCE SHOCKS

Brand New BDS Suspension 2" Leveling Kit with Front & Rear FOX 2.5 Performance Elite Shocks (Part #BDS1838FPE).

This BDS Leveling Kit is engineered to raise the front of your truck up to 3 inches using precision designed corrected torsion keys, eliminating the factory nose-down rake while maintaining proper suspension geometry. To further enhance performance, the kit includes heavy-duty BDS tubular upper control arms that provide increased suspension travel and improved strength over the factory stamped steel arms, allowing the suspension to cycle more freely both on and off-road.

To match your driving style and performance needs, this kit is available with FOX 2.5 Performance Elite shocks featuring Dual Speed Compression (DSC) adjustment. The DSC system allows drivers to independently tune high-speed and low-speed compression damping, giving you the ability to dial in ride quality, handling, and off-road performance for everything from daily driving to rough terrain. Designed to retain the factory rear ride height, this leveling kit provides a clean, aggressive stance while improving front suspension capability and maintaining the functionality your heavy-duty GM truck was built for.

Fits:

• Chevrolet:
• 2020-2026 Silverado 2500 HD 4WD
• 2020-2026 Silverado 3500 HD 4WD
• GMC:
• 2020-2026 Sierra 2500 HD 4WD
• 2020-2026 Sierra 3500 HD 4WD

Notes:

• This kit comes in 3 variants: Fox 2.5 Performance Elite Shocks (BDS1838FPE), Fox 2.5 HTO (BDS1838FPS), & FOX 2.0 Performance (BDS1838FS).
• Disassembly/assembly of the factory torsion bar system requires the use of a special unloading tool. The GM specified tool #CH48809.
• Some minor trimming may be necessary to fit certain wheel/tire combination. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks and typically consists of trimming the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter/ narrower tires will reduce/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet.
• Stock wheels and stock tires can be installed, but depending upon alignment and tire profile will be tight to the ball joint cup. Wheel spacers may be required to use stock wheels and stock tires.
• Will NOT work with AT4X or ZR2 models, lower control arm profile is different
• Recommended Tires & Wheels (Trimming May Be Required): 35 x 12.5 with 22 x 9 and 5.75 in. Backspace, 285 / 60 with 18 x 9 and 5.75 in. Backspace, & 285 / 65 with 20 x 9 and 6.125 in. Backspace

FOX 2.5 Performance Elite Series:

• Increased off-road capabilities
• Easily adjust your shock for terrain, load and speed
• 2.5-inch Impact extruded aluminum body
• Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
• External reservoir design separates shock oil from the high-pressure nitrogen
• DSC - Dual Speed Compression Adjuster comes standard
• Fully serviceable for a lifetime of use

Specs:

• Front Lift Method: Torsion Key
• Front Lift Height: 2"
• Rear Lift Method: Stock
• Rear Lift Height: 0"

You can view and download the instruction booklet here.