BDS 2011-2016 F250,F350 4WD DIESEL 4" RADIUS ARM LIFT,4" BLOCK,NX2 SHOCKS

Brand New BDS Suspension 4" Radius Arm Lift Kit with Nitro Shocks and 4 Inch Block Kit (Part #BDS1596H).

Improve the ride on your 2011-2016 Ford F250 and F350 Super Duty diesel truck with this 4-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, U-bolt flip kit for max ground clearance, brake line brackets and a matching set of FOX Performance shocks.

HD Radius Arms: In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs: A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction: To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while re-centering the front axle.

Fits:

• Ford:
  
  • 2011-2016 F-250 Super Duty 4WD Diesel
  • 2011-2016 F-350  Super Duty 4WD Diesel

NOTE:

• Removal of factory block required. Net rear lift height will vary depending on the height of the factory block but will result in a level stance.
  
• If equipped with a 2-piece driveshaft, a driveshaft alignment kit may be required.
  
• Although extremely rare, front and/or rear driveline vibration may occur.
  
• If equipped with a rear sway bar, #123009 is required.
  
• U-bolts will not work on dually.
• Recommended Tires & Wheels (Trimming May Be Required) 35 x 12.5 with 18 x 9 and 4.5 in. Backspace, or 35 x 12.5 with 20 x 9 and 4.5 in. Backspace

Features:

• Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  
• Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
  
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  
• Fabricated steel blocks provide level stance from front to rear
• NX2 Nitro Series
  
• Nitrogen-charged
  
• Twin-tube design
  
• 10-stage velocity-sensitive valving
  
• Dual-welded ends for increased strength
  
• 1-3/8-inch high-flow piston
  
• Self-lubricating seals
  
• Silver powder coat finish
• 4 Inch Block Kit (Rear)
  
• Made of cast iron for high strength.
  
• Designed to provide correct pinion angles.

Specs:

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 4"
• Rear Lift Height: 4"

You can view and download the assembly/instruction booklet here, here, and here.