INTAKE MANIFOLD KIT,LS1/2/6 LO-RAM,FF,SATIN

BRAND NEW HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT, FRONT-FEED PLENUM, SILVER FINISH, COMPATIBLE WITH LS1, LS2 & LS 6 GEN III & IV ENGINES

THE HOLLEY LS1/2/6 LO-RAM INTAKE MANIFOLD KITS ARE DESIGNED FOR GM LS GEN III & IV ENGINES EQUIPPED WITH GM LS1/2/6 (CATHEDRAL PORT) CYLINDER HEADS. THESE INTAKE MANIFOLDS WILL WORK WITH OE OR AFTERMARKET CYLINDER HEADS. THESE MANIFOLDS ARE DESIGNED FOR FORCED INDUCTION (SUPERCHARGED OR TURBOCHARGED) ENGINE APPLICATIONS & 105MM THROTTLE BODY PART #112-581 OR SIMILAR MODELS.

THE BASE INTAKE MANIFOLD IS DESIGNED WITH LOW HEIGHT TO AID THE PACKAGING OF A PLENUM MOUNTED AIR-TO-WATER INTERCOOLER IN A TOP-FEED CONFIGURATION. THE 300-621 LO-RAM FRONT-FEED PLENUM ENTRY WAS CONFIGURED TO PROVIDE A VERY LOW PROFILE MODULAR INTAKE MANIFOLD SUITABLE FOR TURBOCHARGED OR CENTRIFUGALLY SUPERCHARGED ENGINES.THE FUEL RAIL KITS COME WITH 2 SETS OF BRACKETS: A SET FOR LONG (USUALLY STANDARD LENGTH) FUEL INJECTORS & SET FOR SHORT (SUCH AS PICO, OR LS7) FUEL INJECTORS.

THE 300-621 LO-RAM FRONT-FEED PLENUM ENTRY WAS CONFIGURED TO PROVIDE A VERY LOW PROFILE MODULAR INTAKE MANIFOLD SUITABLE FOR TURBOCHARGED OR CENTRIFUGALLY SUPERCHARGED ENGINES.THE FUEL RAIL KITS COME WITH 2 SETS OF BRACKETS: A SET FOR LONG (USUALLY STANDARD LENGTH) FUEL INJECTORS & SET FOR SHORT (SUCH AS PICO, OR LS7) FUEL INJECTORS.

THE FUEL RAIL KITS COME WITH 2 SETS OF BRACKETS: A SET FOR LONG (USUALLY STANDARD LENGTH) FUEL INJECTORS & SET FOR SHORT (SUCH AS PICO, OR LS7) FUEL INJECTORS.

NOTE: LO-RAM BASE INTAKE MANIFOLD PLENUM TOP MOUNTING FLANGE HEIGHT - 5.17"

NOTE: FRONT FEED PLENUM CONFIGURATION W/105MM THROTTLE BODY ADAPTER - 6.86"

FEATURES:

• DESIGNED FOR GM LS GEN III AND IV ENGINES EQUIPPED WITH GM LS1/2/6 (CATHEDRAL PORT) CYLINDER HEADS
• DESIGNED FOR FORCED INDUCTION (SUPERCHARGED OR TURBOCHARGED) ENGINE APPLICATIONS WITH PEAK POWER AT 7000-8000 RPM DEPENDING ON APPLICATION.
• WITH FORCED-INDUCTION & SHORT RUNNER LENGTH THE ENGINE RPM AT WHICH PEAK POWER OCCURS IS MORE LIKELY TO BE COUPLED TO THE SUPERCHARGER OR TURBOCHARGER BEING USED
• MODULAR DESIGN ALLOWING THE USE OF FRONT-FEED PLENUM ENTRY
• INTAKE DESIGN FACILITATES CUSTOM INLET DUCT AND THROTTLE BODY PLACEMENT
• LOW HEIGHT TO FIT UNDER A STOCK OR MILDLY MODIFIED HOOD IN THE FRONT-FEED CONFIGURATION
• FRONT ENTRY PLENUM FLANGE ALLOWS DESIGN & FABRICATION OF SPECIAL THROTTLE BODY ADAPTERS OR INLET DUCTS FOR CUSTOM INSTALLATIONS
• CLEARS 4TH GEN CAMARO & C5 CORVETTE COWLS & HOODS WITHOUT MODIFICATION
• HIGH VOLUME FUEL RAILS & MOUNTING HARDWARE INCLUDED WITH 3/4"-16 O-RING PORTS (8 AN)
• LO-RAM BASE INTAKE MANIFOLD PLENUM TOP MOUNTING FLANGE HEIGHT - 5.17"

SPECS:

• BRAND:BRAND: HOLLEY EFI
• ENGINE: GM LS 1,2 & 6
• FINISH: SILVER
• FLANGE STYLE: EFI
• FRONT HEIGHT: 6.86" WITH THROTTLE BODY ADAPTER
• FUEL SYSTEM TYPE: EFI
• MANIFOLD TYPE: LO-RAM
• PRODUCT TYPE: MANIFOLD

YOU CAN VIEW AND DOWNLOAD THE COMPLETE ASSEMBLY INSTRUCTION BOOKLETS FOR THIS MANIFOLD KIT HERE.