CONVERTER,3/4 RACE,84-UP GM,4L60E
CONVERTER,3/4 RACE,84-UP GM,4L60E
SKU:HAY 97-1G24Q
BRAND NEW HAYS TWISTER 3/4 RACE TORQUE CONVERTER, 9.6" DIAMETER, 10.75" BOLT PATTERN, 2400-2800 RPM STALL, COMPATIBLE WITH 1984-UP GM 4L60E TRANSMISSIONS
HAYS TWISTER 3/4 RACE PERFORMANCE TORQUE CONVERTERS ARE A PERFECT ADDITION TO OUR LINE OF PERFORMANCE FLEXPLATES, CLUTCHES & FLYWHEELS. INTENDED FOR STREET/STRIP COMBINATIONS, THE TWISTER 3/4 RACE TORQUE CONVERTER PERFECTLY DESCRIBES A CONVERTER SUITED FOR AN APPLICATION JUST SHY OF FULL RACE CONVERTER.
NOTE:THE 3/4 RACE SERIES CONVERTERS ARE NOT DESIGNED TO BE USED WITH NITROUS OXIDE OR TRANS-BRAKES.
NOTE: HAYS RECOMMENDS AN EXTERNAL TRANSMISSION COOLER FOR ALL TWISTER 3/4 RACE CONVERTERS (A MINIMUM SIZE OF 18,000 GVW OR 15,000 BTU RATING.)
NOTE: STALL RANGES WILL VARY DEPENDING ON ENGINE SET-UP, WEIGHT OF VEHICLE & GEAR RATIO.
FEATURES:
- 3/4 RACE SERIES CONVERTERS ARE BUILT, TESTED & PROVEN TO SUPPORT UP TO 650 HP.
- STATE OF THE ART SPRAY WELDING PROCESS IS USED IN SELECT AREAS. SPRAY WELDING PROVIDES CLEAN, STRONG & CONSISTENT FUSION WHILE ALSO INCREASING STRENGTH THROUGH HARDENING FROM HIGHER PROCESS TEMPERATURE
- EACH CONVERTER IS HAND-BUILT & INSPECTED IN EVERY STEP OF ASSEMBLY TO ENSURE TOP OF THE LINE QUALITY
- ALL HAYS CONVERTERS ARE INTERNALLY WELDED COMPARED TO BRAZING. TESTING HAS SHOWN WELDING PROVIDES LONGER CONVERTER LIFE WHILE ALSO ENHANCING CONSISTENCY
- HEAVY DUTY TORRINGTON BEARINGS ARE USED FOR GREATER STRENGTH & DURABILITY
- STATORS ARE CHOSEN WITH HIGH FLOW VENTS & CHANNELS TO PROMOTE COOLING IN HEAT PRODUCING HIGHER HORSEPOWER APPLICATIONS
- INCREASED HORSEPOWER & ACCELERATION DUE TO A WEIGHT SAVING, ONE APPLICATION DESIGN. ALMOST ALL HAYS CONVERTERS ARE BUILT FOR ONE APPLICATION TO REDUCE WEIGHT COMPARED TO A MULTI-BOLT PATTERN CONVERTER.
- 3/4 RACE SERIES CONVERTERS ARE OFFERED IN SEVERAL DIFFERENT STALL SPEEDS FOR GM, FORD & CHRYSLER TRANSMISSIONS
SPECS:
- ANTI-BALLOON PLATE: NO
- BALANCED: YES
- BOLT CIRCLE: 10.75"
- CRANK PILOT DIAMETER: 1.703"
- DIAMETER: 9.6"
- INPUT SPLINE: 30
- LOCK UP/OVERDRIVE: YES
- PRODUCT TYPE: AUTO TRANSMISSION TORQUE CONVERTER
- SERIES: 3/4 RACE
- STALL: 2400-2800
- TRANSMISSION: 4L60E
- USE WITH POWER ADDER: NO
- USE WITH TRANS-BRAKE: NO
YOU CAN VIEW AND DOWNLOAD THE COMPLETE ASSEMBLY INSTRUCTION BOOKLETS FOR THIS TORQUE CONVERTER HERE.