1 6

MANIFOLD, 1955-86 SB CHEVY, SUPER VICTOR

MANIFOLD, 1955-86 SB CHEVY, SUPER VICTOR

EDL 2925

$463.95
$463.95
View full details

Brand New Edelbrock Super Victor 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8 (Part #2925).

Edelbrock Super Victor 23-degree intake manifold is designed for heads with a standard port location, the runners match the "flat floor" entry of the latest 23-degree heads. Carb pad height is 5-1/2" (from end seals) and overall, this intake is about one-inch taller than our Victor Jr. intake #2975. Runners have a 2.80 square-inch cross-section.

Installation Notes:
  • No provisions for exhaust heated chokes or EGR.
  • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
  • Optimum cylinder head port opening size should be as close as possible to the size of the gasket being used.
  • Hardened washers must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
  • Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
  • NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
  • To ensure maximum performance and a proper seal, Edelbrock gaskets which are specifically designed and manufactured for use with Edelbrock parts must be used.

Specs:   

  • Series: Victor
  • Material: Aluminum
  • Gasket Or Seal Included: No
  • Recommended Intake Gasket: Edelbrock #7201
  • Carb Recommendations: Use appropriate standard flange square-bore racing carb.
  • Vehicle Model: Chevrolet
  • RPM Range: 3500-8000 RPM
  • Rear Maximum Height: 5.50 in
  • Plane Type: Single

You can view and download the complete assembly instruction booklet here.

Edelbrock Products