PERFORMER-PLUS CAMSHAFT FOR 1992-97 LT1

Brand New Edelbrock Rollin' Thunder Camshaft for 1992-1997 LT1 Engine (Part #2108).

Edelbrock Rollin' Thunder Camshaft is designed for the LT1 engines from 1992-97 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 RPM. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. This camshaft produced 430 HP and 420 Ft Lbs of Torque when paired with RPM Air Gap intake manifold #7109 and RPM LT4 cylinder heads #61939.

Installation Notes:

• Compression ratio of at least 9.5:1
• Adjustable valvetrain required
• Lower than stock rear gearing
• Re-flashing of the ECU is required and can be used with either standard or automatic transmissions.
• High performance torque converter (in automatic transmission equipped vehicles) are necessary
• Please be advised that an improper installation may result in Low Mileage, Poor Performance, and Costly Reinstallation and even Engine Damage. Installing a camshaft is a complex procedure. Please follow the instructions carefully. 

Specs:

• Series: Performer-Plus
  
• Computer Controlled Compatible: Yes
• Lifter Type: Roller
• Intake duration: 286 Degrees
• Exhaust duration: 286 Degrees
• Valve Lift w/ Factory Rocker Arm Ratio: 0.525"
• Lobe separation: 112 Degrees

You can view and download the complete assembly instruction booklet here.