EDELBROCK CAMSHAFT KIT,PERFORMER-PLUS,1957-86 SMALL-BLOCK CHEVROLET

Brand New Edelbrock Performer-Plus Camshaft Kit for 1957-1986 Small-Block Chevrolet (Part #2102).

Edelbrock Performer-Plus Camshaft #2102 is designed for 265-400 Chevy V8 engines from 1957-86 and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2102 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 320HP and 382 Ft Lbs of Torque when paired with Performer EPS intake manifold #2701 and Performer cylinder heads #60909. 

Notes:

• Oil/additive must contain Zinc designed for use with flat tappet camshafts.
• Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up.
• Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm.

Specs:

• Duration At .050 Intake: 204 Degrees
  
• Duration At .050 Exhaust: 214 Degrees
  
• Lift At Valve Intake: .420"
  
• Lift At Valve Exhaust: .442"
  
• Lobe Separation: 112 Degrees
  
• Intake Centerline: 107 Degrees
  
• Idle Vacuum At 1000 Rpm: 14"
• Recommended Valve Springs for OEM heads: Edelbrock part #5802
• Lifter Type: Hydraulic Flat Tappet

You can view and download the complete assembly instruction booklet here.