1 2

STEERING BOX,VEGA 140 MANUAL,20:1,REVERSE,OUTSIDE RAIL

STEERING BOX,VEGA 140 MANUAL,20:1,REVERSE,OUTSIDE RAIL

105-3011

$199.99
$199.99

Yes, we have this item in stock and ready to ship immediately!
View full details
  • BRAND NEW VEGA 140 GM MANUAL CROSS STEERING GEAR BOX WITH 20:1 STEERING RATIO FOR THE APPLICATIONS LISTED BELOW. THESE ARE BRAND NEW GEAR BOXES PRODUCED BY SOUTHWEST SPEED INC.

  • THESE SOUTHWEST SPEED STEERING MANUAL BOXES ARE PERFECT FOR THE CROSS STEERING SYSTEM IN HOT ROD APPLICATIONS WITH STRAIGHT AXLE SETUPS: INCLUDING STREET RODS, RAT RODS, HOT RODS, T-BUCKETS, MODEL A, 1923 - 1948 FORDS, AND MANY OTHER VEHICLES. THESE BOXES ARE CONSTRUCTED OF MODERN HIGH STRENGTH STEEL AND NEEDLE BEARINGS TO ENSURE DURABILITY, WHICH ORIGINAL BOXES JUST CANNOT OFFER.

    • FEATURES:

    • REVERSED CROSSING STEERING GEAR BOX
    • NEEDLE BEARING DESIGN FOR LONGER LIFE
    • STEERING SHAFT SPLINE: 5/8"-36
    • 20:1 STEERING GEAR RATIO
    • 5 1/2" TURNS (LOCK-TO-LOCK)
    • MOUNTING PATTERN IS 2 3/4" AND 4 3/8" CENTER-TO-CENTER OF THE THREE MOUNTING HOLES
    • RECOMMENDED FOR VEHICLES WEIGHING 2800 LBS OR LESS

    FITS:

    • THESE BOXES ARE PERFECT FOR THE CROSS STEERING SYSTEM IN HOT ROD APPLICATIONS WITH STRAIGHT AXLE SETUPS: INCLUDING STREET RODS, RAT RODS, HOT RODS, T-BUCKETS, MODEL A, 1923-1948 FORDS, AND MANY OTHER VEHICLES:
      • YOU CAN SEE A BETTER DESCRIPTION OF "CROSS-STEERING" TO THE RIGHT OF PAGE.
      • NOTE: THIS STEERING BOX IS NOT A DIRECT FIT PART, MODIFICATION WILL BE REQUIRED TO USE THIS STEERING BOX.

      STEERING BOX SPECIFICATIONS:

      • 20:1 TURNING RATIO
      • 5 1/2 TURNS LOCK TO LOCK
      • INPUT SHAFT: 5/8-36 SPLINE
      • OUTPUT SHAFT: 32 SPLINES WITH 4 MASTER SPLINES THAT TAPER FROM .997" TO .934"
      • THIS IS THE STOCK CONFIGURATION, MEANING WHEN YOU TURN THE INPUT SHAFT CLOCKWISE, THE OUTPUT SHAFT ALSO TURNS CLOCKWISE
      • CENTERLINE THROUGH THE OUTPUT SHAFT TO THE FRONT OF STEERING BOX MEASURES APPROXIMATELY: 3"
      • OVERALL LENGTH OF BOX EXCLUDING INPUT SHAFT: 5 3/4"
      • INPUT SHAFT EXTENDS REARWARD 1 3/16" FROM ADJUST SCREW TO END OF OUTPUT SHAFT: 8"
      • LENGTH FROM OUTSIDE OF BOX TO MOUNTING SURFACE: 4 1/2"
      • BOX HAS A SWELL IN THE CASTING THAT EXTENDS PAST THE MOUNTING LEGS THAT IS AN ADDITIONAL 1/4"

      STEERING WHEEL RATIO SPECIFICATIONS:

      • 8:1 TURN STEERING WHEEL 8 DEGREES: PITMAN ARM TURNS 1 DEGREE
      • 12:1 TURN STEERING WHEEL 12 DEGREES: PITMAN ARM TURNS 1 DEGREE
      • 14:1 TURN STEERING WHEEL 14 DEGREES: PITMAN ARM TURNS 1 DEGREE
      • 16:1 TURN STEERING WHEEL 16 DEGREES: PITMAN ARM TURNS 1 DEGREE
      • 20:1 TURN STEERING WHEEL 20 DEGREES: PITMAN ARM TURNS 1 DEGREE
      • 22:1 TURN STEERING WHEEL 22 DEGREES: PITMAN ARM TURNS 1 DEGREE

      NOTE: FOR A BETTER EXPLANATION: 360 DEGREES OF ROTATION ON STEERING WHEEL EQUALS 18 DEGREES OF MOVEMENT ON THE PITMAN ARM OR SHAFT. 360 DIVIDED BY 18 EQUALS 20 TO 1 RATIO.

      YOU CAN VIEW AND DOWNLOAD THE COMPLETE INSTRUCTION BOOKLET FOR THIS STEERING BOX HERE.